LSE-TRAVELER

The LSE –TRAVELER is similar to the model LSE but in a smaller, portable configuration. Designed to be shipped or checked as airline luggage the rugged LSE-TRAVELER fits into a airline safe, military spec 4150J watertight, foam filled travel case together with sample table and computer.  The model is completely self-contained and includes a PCMCIA interfaced notebook computer that is ready for measurement right out of the case. Priced under $28K.  

stokes ellipsometer LSE-TRAVELER description
The Stokes Ellipsometer is a continuation of an entirely new line of ellipsometers based on the advanced StokesMeter™ technology (winner of Photonics Spectra and R&D 100 best new products awards). The units' elegant design offers unprecedented ease of use and instantaneous measurement.

This  ellipsometer uses patented StokesMeter™ technology with no moving parts and no modulators to quickly and accurately determine the complete polarization state of the 6328Å laser measuring beam at a 70° incidence angle. The space-saving design features a small footprint yet it can accommodate large samples up to 200mm wide. The sample stage can be easily moved by hand to measure any point on the sample surface. The sample table includes a manual tilt and table height adjustment which is set using an alignment screen on the computer.

Windows 2000/XP LGEMP included software can measure the top layer film thickness and film refractive index on a substrate or on 1, 2, or 3 known bottom layers. The films can be transparent or absorbing. This durable integration of hardware and software is fast and easy to use.

Extremely precise and stable the LSE-TRAVELER Stokes Ellipsometer gives all of the functionality and precision of large table top ellipsometers in a compact, easily transportable package. 

high speed film thickness measuring system measures in less than a second!

features

• Tilt-free, focus free, hands-off operation for similar wafers.
• Fastest possible instrument for thin film measurement.
• Trouble-free, no moving parts patented StokesMeter™ measurement head.
• Measures complete state of polarization useful for rough, scattering samples.
• Accurate, stable measurements using spectrally precise laser ellipsometry.
• Simple, compact, portable instrument - competitively priced.

description of stokesmeter™ technology
This patented device uses no moving parts and no modulators to quickly and accurately determine the complete polarization state of the measuring beam.

The diagram above shows the StokesMeter™ photopolarimeter for the simultaneous measurement of all four Stokes parameters of light. The light beam, the state of polarization of which is to be determined, strikes, at oblique angles of incidence, three photodetector surfaces in succession, each of which is partially spectrally reflecting and each of which generates an electrical signal proportional to the fraction of the radiation it absorbs. A fourth photodetector is substantially totally light absorptive and detects the remainder of the light. The four outputs thus developed form a 4x1 signal vector I which is linearly related, I=AS, to the input Stokes vector S. Consequently, S is obtained by S=A(-1)I. The 4x4 instrument matrix A must be nonsingular, which requires that the planes of incidence for the first three detector surfaces are all different. For a given arrangement of four detectors, A can either be computed or determined by calibration.

technological advantage
The clean, compact StokesMeter™ replaces a typical rotating analyzer assembly consisting of a drum, prism, encoders, switches, motor and detector and their associated electronics. In addition, the waveplate mechanism on the polarizer arm, is eliminated. This results in a fast, precise, stable no moving parts ellipsometer.

An outstanding feature is the Stokes Ellipsometer's compensation for small changes in angular beam deviation caused by sample out-of-flatness. This permits fast, uninterrupted measurement over the entire wafer surface without the need to pause to correct for focus and tilt. When scanning similar samples, tilt-free, focus-free operation is the obvious benefit.

Rough scattering samples common in the solar cell industry are difficult to measure accurately with most ellipsometers because of the loss of signal strength and depolarization of the measurement beam. Although there are ways to boost the signal strength and capture more scattered light, dealing with depolarization is much more difficult and requires the determination of the complete state of polarization namely the measurement of the 4 stokes parameters S0, s1, s2, s3. Gaertner Stokes Ellipsometers do this naturally as our StokesMeterä polarimeter is used as the ellipsometer analyzer. This gives Stokes Ellipsometers the unique ability to instantly separate the polarized from the unpolarized components of the measuring beam thereby delivering a highly accurate measurement of film thickness and index based only on the totally polarized component of light. The L-SCAT scatter option includes a hardware modification to capture more of the scattered light from rough, textured surfaces and software display of the degree of polarization P.

stokes ellipsometer LSE-TRAVELER specifications

back to ellipsometers