measuring microscopes
Support Rod & Mounts for Microscopes
    & Telemicroscopes


 

 


M330 Rod with Threaded Collar   
Consists of a steel rod 19 mm (3/4 inch) in diameter and 15 cm (6 inches) long with inside threaded collar for holding our standard microscopes M101A, telemicroscopes M101ATand M508 telescope with mounting thread 0.9877 - 1MM NS2.

M304 Adapter   
For holding any of standard microscopes parallel to the direction of travel of the micrometer carriage in our micrometer slides. This provides micrometer focusing useful for determining the depth of depressions such as grooves, scratches, etchings or measuring refractive index etc. Mounting thread is the same as in the M330 Rod and Collar. 

M304R  Adapter   
Same as M304 Adapter above but with an 3/8-16 threaded screw in addition to the standard 0.990-1mm  thread to mount to user supplied fixturing and accessories.   

M326P  Adapter Plate   
The  M326P is a 5 inch square plate 1/4 inch thick.  The threaded hole into which any of our standard microscopes will fit has a 1mm pitch and 0.990 inch major diameter.   Two holes are available for attaching the plate to user supplied fixturing and accessories.

 

back to microscopes

company info | email@gaertnerscientific.com

2006-2013 gaertner scientific corporation